A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

Abnormal changes of dynamic derivatives at low reduced frequencies

A number of studies have found that abnormal changes of dynamic derivatives occurred at very low reduced frequencies, but its inducement mechanism is not very clear. This paper has researched the abnormal changes and analyzed the influence on some parameters by solving the unsteady flow around forced oscillation airfoils based on Navier-Stokes equations. Results indicate that when the reduced frequency approaches to zero, the dynamic derivatives obtained by the numerical method will diverge. We have also proven it in theory that this phenomenon is not physical but completely caused by numerical singularity. Furthermore, the abnormal phenomenon can be effectively mitigated by using the time spectral method to solve the aerodynamic forces and the integral method to obtain the dynamic derivatives. When the reduced frequency is in the range of 0.001–0.01, the dynamic derivative maintains nearly unchanged for the whole speed region. This study can provide a reference for the reasonable choice of the reduced frequency in calculations and experiments of dynamic derivatives.     

高效相变蓄热装置结构设计及试验研究

文章针对某飞行器舱内大功率设备控温需求,提出了相变蓄热技术解决方案,建立了平板式肋片强化相变蓄热装置物理模型,根据大功率伺服舵机控制器热耗及工作模式等参数条件,采用十八烷为相变吸热材料,设计了一台高效平板式肋片相变蓄热装置,并通过地面试验研究,验证了该装置的控温性能、稳定性及等温性。试验结果表明:所设计的肋片式高效相变蓄热装置,在120 W热源功率下,可以将设备温度控制在50℃以下超过3000 s;榫槽形式的封装结构具有良好的密封性能,相变蓄热装置在多次相变循环后无泄漏;在3000 s测试时间内相变装置内部最大温差为3℃,具有很好的等温性。     

大型上单翼飞机机翼三维全场变形测量方案

针对大型上单翼飞机在飞行过程中机翼大挠度变形检测难题,提出了大倾角相机视场下机翼的非接触三维全场变形测量方案。根据上单翼飞机结构特点,将预先标定内参数和相机外参数的共轭相机组安装于飞机垂直尾翼上,采集飞行中的机翼变形图像。首先,提出了大倾角弱相关散斑匹配方法,解决了相机在大倾斜角度状态下采集到的机翼变形弱相关图像相关性差,难以相关匹配的问题。其次,由于测量相机安装于垂直尾翼,飞行测量过程中相机会受到气流扰动产生振动,本文提出了一种相机动态校正方法,通过在机背布置预拉伸刚性不动编码标志点,实时解算基准相机的绝对外参数,进而确定共轭相机的绝对外参数,实现所有测量相机外参数的动态校正。最后,开发了机翼变形全场测量软硬件系统,搭建了缩小比例机翼模型试验台并进行了仿真测量,对系统测量精度进行了比对分析。测量结果验证了本方案的有效性、可行性,对实机测量有一定的指导意义。     

舰载机着舰指标体系构建

舰载机着舰的难度很大、要求很高,而着舰系统的复杂性又使得指标要求涉及很多方面。为了从整体上明确着舰的指标要求,从而有利于着舰理论和工程等研究,整理了公开文献中分散的指标要求,并梳理了指标间的逻辑关系,最终构建了着舰指标体系,将指标归纳到总体框架中。研究结果对着舰的控制与分析等具有一定的参考价值。     

超高速撞击下PTFE/Al含能材料薄板的载荷特性分析

不同于传统惰性材料的空间碎片防护结构,含能材料防护结构在超高速撞击下的冲击起爆特性是其防护能力得以提高的根本原因。PTFE/Al含能材料防护结构的冲击起爆特性改变了弹丸强冲击载荷下的破碎机制,弹丸内部的冲击压力对于分析含能材料在超高速撞击下的防护机理具有重要意义。对超高速撞击试验中回收的PTFE/Al防护结构后板进行损伤特性分析,获得了对应速度条件下弹丸的破碎特性。基于一维冲击波理论,分析PTFE/Al靶板在超高速撞击条件下的冲击响应过程,结合考虑化学反应效率的热化学反应模型,获得了弹丸在碰撞与爆炸联合作用下的载荷特性,通过与试验结果对比验证,获得该材料完全反应的临界撞击速度约为1800 m/s,弹丸的临界破碎速度为2875 m/s,小于铝防护结构中对应的临界破碎速度。给出了弹丸在PTFE/Al、铝两种防护结构中产生相同冲击压力时对应的临界速度,分别为弹道段的800 m/s和破碎段的3580 m/s。     

非线性能量阱对飞轮振动抑制效果的实验研究

利用薄片金属梁作为非线性刚度元件，构建一种非线性能量阱。为了验证非线性能量阱对飞轮振动特性的抑制效果，搭建地面飞轮测试系统。分别采用力锤敲击和飞轮以恒定转速运行的方法施加不同载荷，对安装非线性能量阱前后测试系统各典型位置的振动响应进行对比研究。利用实测数据，采用傅里叶变换方法将动态响应信息分别在时间域和频率域内展开。研究表明：力锤敲击产生的冲击载荷和飞轮以恒定转速运行产生的稳态载荷均可以激发非线性能量阱定向能量传输；受非线性能量阱的影响，柔性支架设备安装面和飞轮安装面振动响应得到有效抑制。但是，由于非线性能量阱阻尼和吸振子质量较小，不同程度削弱了其振动抑制效果。     

Multi-mode diagnosis of a gas turbine engine using an adaptive neuro-fuzzy system

Gas Turbine Engines (GTEs) are vastly used for generation of mechanical power in a wide range of applications from airplane propulsion systems to stationary power plants. The gas-path components of a GTE are exposed to harsh operating and ambient conditions, leading to several degradation mechanisms. Because GTE components are mostly inaccessible for direct measurements and their degradation levels must be inferred from the measurements of accessible parameters, it is a challenge to acquire reliable information on the degradation conditions of the parts in different fault modes. In this work, a data-driven fault detection and degradation estimation scheme is developed for GTE diagnostics based on an Adaptive Neuro-Fuzzy Inference System (ANFIS). To verify the performance and accuracy of the developed diagnostic framework on GTE data, an ensemble of measurable gas path parameters has been generated by a high-fidelity GTE model under (a) diverse ambient conditions and control settings, (b) every possible combination of degradation symptoms, and (c) a broad range of signal to noise ratios. The results prove the competency of the developed framework in fault diagnostics and reveal the sensitivity of diagnostic results to measurement noise for different degradation symptoms.     

降落伞自动开伞器技术现状及发展方向

自动开伞器是为保障开伞安全而与降落伞配套使用的关键航空器材,为能总体把握其技术发展状况,促进自动开伞技术不断完善和发展,首先从工作原理上概述了三类机械式自动开伞器的技术状况,然后立足当前机械式自动开伞器的使用现状和存在问题,探讨和提出了我国自动开伞器应向机电式和电子式方向发展的技术前景。     

中红外激光在光电对抗领域的应用及进展

近年来为有效对抗先进的红外制导武器的威胁，先进的红外对抗手段和方式不断推陈出新。其中利用中红外激光辐射致盲、致炫和毁伤的手段可以有效地对抗红外制导武器的威胁。为此本文重点介绍了中红外激光在光电对抗领域的应用；然后，对中红外激光光源和分类及其原理进行了阐述，并介绍了美国和俄罗斯在中红外光电对抗的系统领域的发展现状；最后，对中红外（3-5μm）光电对抗的应用发展和未来的趋势进行了总结，并对化学、气体和固体中红外激光光源的应用进行了展望。